[HWABN2] Hi-Gain Wireless-300N Access Point and Bridge Pro and MiMo 14dBi Antenna:
Purchase 2 sets of this combo kits can reach maximum distance up to 1 miles.
First HWABN2 install on the main building wired to your router, second HWABN2 setup on the other building.
Boost your Wireless Network performance with the High Power, Hi-Gain
Wireless-300N Access Point / Bridge Pro!
This highly efficient access point is the best choice for Small office / Home
office users. It allows computers and network devices to gain wireless access in
several modes throughout their network. Modes supported include: Access Point,
Bridge Client, Bridge Point to Point, Bridge Point to Multi-Point, AP Bridge WDS
modes. The HWABN2 allows you to effortlessly convert a standard network to a
robust high performance network. Most standard wireless networks diminish
significantly past a coverage radius of 200 feet. Anywhere outside the coverage
zone will have slow and unstable connections for intensive online activities,
such as web surfing, video chatting, streaming, and gaming. The HWABN2 solves
this issue with an internal power amplifier with a transmit power of 500mW,
reducing Wi-Fi interference and optimizing your wireless signal. Range Amplified
Technology boosts the HWABN2's wireless performance up to three times stronger
than most standard wireless Access Point/Bridge devices on the market. The
removable antennas allow quick and easy range upgrades for more range demanding
environments. With hassle-free installation using your tablet, smartphone, Mac
or Windows computer, the HWABN2 is sure to give your network the boost it needs
to sustain a stable connection for an uninterrupted online experience.
HOW IT WORKS
The HWABN2 is designed with multiple operating modes; Access Point, Ethernet
Bridge, Bridge: Point-to-Point, Bridge: Point-to-Multiple Point, WDS Bridge.
Image below shows the HWABN2 in Wireless Access Point mode and Ethernet Bridge
mode. See the diagram below for information about the Access Point mode and
Ethernet Bridge mode.
HAO14MD Hi-Gain Outdoor 14dBi MIMO Directional Antenna Kit
Long Range Wireless Coverage, Increase the Strength of Dual-Band Wi-Fi Devices up to 500%*
The HAO14MD Hi-Gain™ Outdoor 14dBi MIMO Directional Antenna Kit is an antenna for extending the range of your 802.11 b/g/n Wi-Fi devices. The HAO14MD increases the wireless strength from a standard 2dBi (decibels) to a staggering 14dBi, resulting in a 500% increase in the wireless coverage and strength.
OPTIMIZE RANGE AND PERFORMANCE WITH DUAL-POLARIZATION MIMO
|The HAO14MD uses smart antenna technology called MIMO (multiple-input and multiple-output). Wireless-N uses MIMO technology to send signals along multiple pathways to ensure a strong user connection and the fastest data throughput possible. The HAO14MD has two high power directional antennas built into one enclosure. Most directional antennas on the market are 1T1R (one antenna transmitting and receiving) but the HAO14MD is 2T2R (two transmitting/two receiving), giving you up to 300Mbps throughput. Built-in polarization variation also guarantees that the two transmitting and two receiving signals do not interfere with each other. With smart antenna technology, the HAO14MD is an ideal component for large area networks|
Simply replace your device antenna with the HAO14MD. The HAO14MD antenna has two SMA adapters, the most commonly used antenna connector. For other type of adapters, please visit Hawking Tech's website for additional selections.
Once you have connected your Hi-GainTM Outdoor 14dBi MIMO Directional Antenna, be sure to note the signal pattern of the antenna. While you will experience superior range and quality with your HAO14MD, you must be in range of the antenna's signal. As indicated by the diagram at the right,
the directional antenna does not give off signal directly below or directly behind the product. You will receive optimal wireless signal by placing your wi-fi enabled device within the designated area. Adjust the antenna as needed.
- Wireless Networking Device with Removable Antennas
- Outdoor Antenna Cable* (Hawking Model No. HAC30N, HAC20N, HAC10N)
- Copper Grounding Wire
- Frequency: 2.4 GHz
- Wireless Standard: 802.11 b/g/n
- VSWR: < 2.0
- Input Impedance: 50 ohm
- Signal Pattern: Directional
Vertical / Horizontal
- 2 x N-Type to SMA adapter
- Material: Brass
- Dimensions: 14.6 (H) x 9.1 (W) x 2.1 (D) in.
- Weight: 3 lbs..
- Temperature: -40°F to +149°F
- Color: White
- Material: PC + ABS
- Mounting Kit: Wall, Pole
2 Hi-Gain™ Heavy Duty Outdoor Antenna Extension Cable (10 foot length)
The Hawking Technology Heavy Duty Outdoor Extension Cable is made with the highest quality material to provide unrivaled reliability and performance. Antenna cables are subject to signal degradation due to the length of the cable. The longer the cable is the greater the signal loss. This results in a loss in overall performance from the antenna. Hawking Technology ensures the lowest possible cable signal loss by using high grade cable material and advanced designs. The HAC10N utilize RG213 cable material which results in lower signal (db) loss/meter. Your final result is the desired and expected performance from your antenna.
Features: Heavy Duty Low Loss Cable Minimizes Signal DegradationWeatherproof DesignN-Plug to N-Plug Nickel Plated Connectors Compatible with all Hawking Hi-Gain Outdoor Antennas
||Boosts the power output to 500mW and filters out Wi-Fi interference to
maximize your wireless performance|
|Allows up to 4 wired device to connect and share an internet
|Quick and easy upgrade for long range environments|
|using a smartphone, tablet, Mac or Windows computers|
- One HWABN2 WiFi 802.11N AP/Bridge.
- One Hi-Gain™ Outdoor 14dBi MIMO Directional Antenna
- One Power Adapter.
- One User Manual.
- One Ethernet cable.
- One Set up Wizard CD-ROM.
- Wall and Pole mounting Kit
- Two N-Type to SMA connecters
- Two 10ft Cables